A.changing the direction of exhaust gas flow
B.increasing the exhaust gas velocity
C.changing the exhaust gas weight
D.increasing the exhaust gas static pressure
您可能感興趣的試卷
你可能感興趣的試題
A.high lube oil temperature
B.low lube oil temperature
C.excessive cylinder cooling
D.high air injection pressure
A.increased engine back pressure
B.sulfuric acid corrosion
C.surface pitting of the turbocharger
D.moisture impingement on the turbocharger compressor blade
A.cylinder exhaust ports
B.injection line
C.cylinder indicator cock
D.banjo oiler line
A.reducing exhaust gas velocity
B.increasing the frequency of gas vibration
C.the use of long head pipes
D.the use of zinc electrodes
A.white smoke in the exhaust
B.high exhaust gas pyrometer readings
C.sparks in the exhaust
D.blue smoke in the exhaust
最新試題
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the（）
The treatment of the fuel oils involves storage, heating, filtering and（）
To proceed to the assistance of a ship in distress is（）
Under MARPOL Code the ship to which it applies has to carry （）
During the diesel engine running, the water level of F.W expansion tank should normally kept in the （） level of glass tube.
If separating effect is not good, which measure should be taken （）
Which of the diesel engine components listed increase air density and helps to improve engine operating efficiency?（）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
The condensers located in various stages of a flash evaporator are cooled by（）