A.cylinder exhaust ports
B.injection line
C.cylinder indicator cock
D.banjo oiler line
您可能感興趣的試卷
你可能感興趣的試題
A.reducing exhaust gas velocity
B.increasing the frequency of gas vibration
C.the use of long head pipes
D.the use of zinc electrodes
A.white smoke in the exhaust
B.high exhaust gas pyrometer readings
C.sparks in the exhaust
D.blue smoke in the exhaust
A.check the cylinder exhausts for black smoke
B.listen for combustion knock in that cylinder
C.isolate each cylinder and inspect the injector
D.check the cylinder exhaust temperature frequently
A.passing the exhaust through long head pipes
B.diffusing exhaust vibrations through activated carbon baffles
C.increasing the exhaust gas velocity
D.reducing the exhaust gas velocity
A.stop the engine immediately to prevent damage
B.increase lube oil pressure
C.slow the engine allowing it to gradually cool
D.decrease the cooling water it temperature to the water jacket
最新試題
The Port State Control officer may witness a fire drill carried out by the crew assigned to these duties on the（）
The condensers located in various stages of a flash evaporator are cooled by（）
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated（）
The cetane rating of diesel fuel is an indication of the （）
Which of the following items don’t belong to dock repair works?（）
During the diesel engine running, the water level of F.W expansion tank should normally kept in the （） level of glass tube.
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
Refrigerant entering the compressor of a refrigeration system should be in which of the following conditions?（）
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a（）
（） is not installed on the main switchboar.