A.white smoke in the exhaust
B.high exhaust gas pyrometer readings
C.sparks in the exhaust
D.blue smoke in the exhaust
您可能感興趣的試卷
你可能感興趣的試題
A.check the cylinder exhausts for black smoke
B.listen for combustion knock in that cylinder
C.isolate each cylinder and inspect the injector
D.check the cylinder exhaust temperature frequently
A.passing the exhaust through long head pipes
B.diffusing exhaust vibrations through activated carbon baffles
C.increasing the exhaust gas velocity
D.reducing the exhaust gas velocity
A.stop the engine immediately to prevent damage
B.increase lube oil pressure
C.slow the engine allowing it to gradually cool
D.decrease the cooling water it temperature to the water jacket
A.worn cylinder liner
B.faulty cylinder relief valve
C.excessive lube oil pressure
D.excessive scavenge air pressure
A.reduce heat radiation to the engine room
B.aid in preventing turbocharger overheating
C.condense and drain moisture from exhaust gases
D.dampen exhaust gas pulsations in the manifold
最新試題
Diesel engine air start system check valves are opened by （）
Under MARPOL Code the ship to which it applies has to carry （）
The shipboard oil pollution emergency plan will be invalid after （）
During the diesel engine running, the water level of F.W expansion tank should normally kept in the （） level of glass tube.
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a（）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
Which one is NOT the ‘clear grounds’ for a more detailed inspection?（）
If two A.C.generators are to be operated in parallel, the load is distributed evenly by（）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?（）