A.reducing exhaust gas velocity
B.increasing the frequency of gas vibration
C.the use of long head pipes
D.the use of zinc electrodes
您可能感興趣的試卷
你可能感興趣的試題
A.white smoke in the exhaust
B.high exhaust gas pyrometer readings
C.sparks in the exhaust
D.blue smoke in the exhaust
A.check the cylinder exhausts for black smoke
B.listen for combustion knock in that cylinder
C.isolate each cylinder and inspect the injector
D.check the cylinder exhaust temperature frequently
A.passing the exhaust through long head pipes
B.diffusing exhaust vibrations through activated carbon baffles
C.increasing the exhaust gas velocity
D.reducing the exhaust gas velocity
A.stop the engine immediately to prevent damage
B.increase lube oil pressure
C.slow the engine allowing it to gradually cool
D.decrease the cooling water it temperature to the water jacket
A.worn cylinder liner
B.faulty cylinder relief valve
C.excessive lube oil pressure
D.excessive scavenge air pressure
最新試題
During the diesel engine running, the water level of F.W expansion tank should normally kept in the () level of glass tube.
Which one is NOT the ‘clear grounds’ for a more detailed inspection?()
()connectors hold best if a wire is accidentally pulled or a connection becomes loose.
If separating effect is not good, which measure should be taken ()
The condensers located in various stages of a flash evaporator are cooled by()
Which of the diesel engine components listed increase air density and helps to improve engine operating efficiency?()
Under MARPOL Code the ship to which it applies has to carry ()
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the()
Which of the listed governor characteristics will greatly affect the load sharing relationship between paralleled diesel generators?()
Using a file without a handle may result in ()