A.centrifuging
B.pressurizing
C.atomization
D.igniting
您可能感興趣的試卷
你可能感興趣的試題
A.making the repair list, booking spare parts and special tools for the dock repair
B.shutting off all of the S.W valves to outboard
C.the sketches or diagrams used for the dock repair
D.cleaning up the oil tank and boiler before enter the dock
A.the highest
B.above 3/4
C.1/2 -3/4
D.the lowest
A.Ammeter and changeover switch
B.Power factor meter
C.Synchroscope
D.Reverse sequence relay
A.seal water supply be cut off
B.make up water supply be cut off
C.oil outlet valve closed or not open sufficiently
D.the flow rate of oily water is too much
When does auxiliary burner of incinerator put into operation? （）
Ⅰ. start incinerator when it is cold
Ⅱ. the sludge for dealing with is little
Ⅲ. the sludge for dealing with is large
Ⅳ. the water and impurity in sludge are too much
Ⅴ. the temperature in incinerator is low
Ⅵ. dealing with little solid rubbish
A.Ⅰ+Ⅱ+Ⅲ+Ⅴ
B.Ⅰ+Ⅱ+Ⅲ+Ⅳ
C.Ⅰ+Ⅳ+Ⅴ+Ⅵ
D.Ⅰ+Ⅱ+Ⅲ+Ⅵ
最新試題
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
The ISPS Code consists of a mandatory section-Part A, which shows（）
Engine parameters shall be corresponded to NOx Technical Files. This is required by （）
If two A.C.generators are to be operated in parallel, the load is distributed evenly by（）
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated（）
For a given exhaust gas boiler, what is the quantity of its evaporation mainly determined?（）
Using a file without a handle may result in （）
（） is not installed on the main switchboar.
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
Which one is NOT the ‘clear grounds’ for a more detailed inspection?（）