A.increased engine back pressure
B.sulfuric acid corrosion
C.surface pitting of the turbocharger
D.moisture impingement on the turbocharger compressor blade
您可能感興趣的試卷
你可能感興趣的試題
A.cylinder exhaust ports
B.injection line
C.cylinder indicator cock
D.banjo oiler line
A.reducing exhaust gas velocity
B.increasing the frequency of gas vibration
C.the use of long head pipes
D.the use of zinc electrodes
A.white smoke in the exhaust
B.high exhaust gas pyrometer readings
C.sparks in the exhaust
D.blue smoke in the exhaust
A.check the cylinder exhausts for black smoke
B.listen for combustion knock in that cylinder
C.isolate each cylinder and inspect the injector
D.check the cylinder exhaust temperature frequently
A.passing the exhaust through long head pipes
B.diffusing exhaust vibrations through activated carbon baffles
C.increasing the exhaust gas velocity
D.reducing the exhaust gas velocity
最新試題
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated()
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a()
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to ()
Engine parameters shall be corresponded to NOx Technical Files. This is required by ()
Using a file without a handle may result in ()
If two A.C.generators are to be operated in parallel, the load is distributed evenly by()
The main purpose of port State control is not to()
When does auxiliary burner of incinerator put into operation? ()Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
Which of the diesel engine components listed increase air density and helps to improve engine operating efficiency?()
The condensers located in various stages of a flash evaporator are cooled by()