A.more economic
B.larger capacity on oil treatment
C.less costive
D.more capable of separating emulsified oil
您可能感興趣的試卷
你可能感興趣的試題
A.gravity separation
B.centrifuge
C.Cyclone
D.Cross-flow membrane filtration
A.The requirement for the oil content of bilge water discharged is 15 ppm
B.No discharge in sensitive waters
C.Any discharge in sensitive waters
D.International, national or local requirements have to be observed
A.The high temperature facilitates primary gravity separation
B.Most of the oil and organic solvents are raised to the top layer
C.The high the temperature is, the more the top oil will be collected
D.The high temperature has little use on the separation of emulsified oil
A.Oil leaking from tanks inside engine room
B.Engine room cleaning water
C.Water leaking from the separator sludge tank
D.Sewage
A.reclaims water
B.purges air without losing refrigerant
C.purges air with some loss of refrigerant
D.purges lube oil from the refrigerant
最新試題
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated()
The treatment of the fuel oils involves storage, heating, filtering and()
The main purpose of port State control is not to()
Which one is NOT the ‘clear grounds’ for a more detailed inspection?()
Flame failure in an automatically fired auxiliary boiler can from a/an ()
The cetane rating of diesel fuel is an indication of the ()
Engine parameters shall be corresponded to NOx Technical Files. This is required by ()
Under MARPOL Code the ship to which it applies has to carry ()
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the()
During the diesel engine running, the water level of F.W expansion tank should normally kept in the () level of glass tube.