A.The requirement for the oil content of bilge water discharged is 15 ppm
B.No discharge in sensitive waters
C.Any discharge in sensitive waters
D.International, national or local requirements have to be observed
您可能感興趣的試卷
你可能感興趣的試題
A.The high temperature facilitates primary gravity separation
B.Most of the oil and organic solvents are raised to the top layer
C.The high the temperature is, the more the top oil will be collected
D.The high temperature has little use on the separation of emulsified oil
A.Oil leaking from tanks inside engine room
B.Engine room cleaning water
C.Water leaking from the separator sludge tank
D.Sewage
A.reclaims water
B.purges air without losing refrigerant
C.purges air with some loss of refrigerant
D.purges lube oil from the refrigerant
A.re-evaporator
B.receiver
C.dehydrator
D.solenoid
A.anemometer
B.potentiometer
C.manometer
D.psychrometer
最新試題
Cold weather starting of a diesel engine may be made easier by（）
To proceed to the assistance of a ship in distress is（）
Flame failure in an automatically fired auxiliary boiler can from a/an （）
The cetane rating of diesel fuel is an indication of the （）
The treatment of the fuel oils involves storage, heating, filtering and（）
Engine parameters shall be corresponded to NOx Technical Files. This is required by （）
Diesel engine air start system check valves are opened by （）
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?（）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
The main purpose of port State control is not to（）