A.the direct acting relief valve is used for controlling lower flows and pressure
B.the pilot operated relief valve is used for controlling higher flows and pressure
C.the pilot operated relief valve is used for controlling lower flows and pressure
D.the controlling accuracy of direct acting relief valve is worse than that of the pilot operated relief valve
您可能感興趣的試卷
你可能感興趣的試題
A.electric motor
B.hydraulic motor
C.compressed air
D.turning gear
A.will be modulated in proportion
B.will be modulated in proportion and integral
C.will be modulated in proportion and differential
D.will not be modulated at all
A.the temperature and flow quantity of the exhaust gas from M/E
B.the quantity of steam demanded
C.the rotary speed and the cooling water temperature of main engine
D.efficiency of M/ turbocharger
A.M/E turbocharger
B.exhaust gas boiler
C.incinerator
D.fresh water generator
A.the former
B.the latter
C.not for sure
D.same each other
最新試題
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
During the diesel engine running, the water level of F.W expansion tank should normally kept in the （） level of glass tube.
The condensers located in various stages of a flash evaporator are cooled by（）
For a given exhaust gas boiler, what is the quantity of its evaporation mainly determined?（）
The treatment of the fuel oils involves storage, heating, filtering and（）
Which of the following items don’t belong to dock repair works?（）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
The ISPS Code consists of a mandatory section-Part A, which shows（）
If two A.C.generators are to be operated in parallel, the load is distributed evenly by（）
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）