A.caused by retarded injection timing
B.caused by a mechanical defect in one cylinder
C.caused by high fuel injection pressures
D.normal for these conditions
您可能感興趣的試卷
你可能感興趣的試題
A.an air bound fuel system
B.damage to cylinder heads and pistons
C.excessive fuel injection
D.excessive air valve lift
A.excessive fuel oil temperature
B.long periods of engine overload
C.metallic contact between nozzles and cylinder heads
D.hard carbon deposit and varnish on the nozzles
A.opposed to the crankshaft rocking couple
B.resonant with the crankshaft natural frequency
C.critical fore and aft crankshaft vibrations
D.horizontal whipping motions of the crankshaft
A.cylindrical in shape with service connections located at the top and bottom
B.opened and made available for inspection during biannual inspections provided
C.with automatic drain traps for the removal of moisture
D.so installed as to make the drain connections effective under extreme conditions of trim
A.Hydraulic stress and distortion will develop
B.Hot spots will develop
C.Fuel oil viscosity will increased
D.An increase in trapped deposits of scale and dirt
最新試題
The treatment of the fuel oils involves storage, heating, filtering and()
When does auxiliary burner of incinerator put into operation? ()Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
Which of the listed governor characteristics will greatly affect the load sharing relationship between paralleled diesel generators?()
() is not installed on the main switchboar.
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to ()
The ISPS Code consists of a mandatory section-Part A, which shows()
To shut down a diesel engine after it exceeds the set maximum speed,which type of device listed should be used?()
The condensers located in various stages of a flash evaporator are cooled by()
If two A.C.generators are to be operated in parallel, the load is distributed evenly by()
Which one is NOT the ‘clear grounds’ for a more detailed inspection?()