A.cylindrical in shape with service connections located at the top and bottom
B.opened and made available for inspection during biannual inspections provided
C.with automatic drain traps for the removal of moisture
D.so installed as to make the drain connections effective under extreme conditions of trim
您可能感興趣的試卷
你可能感興趣的試題
A.Hydraulic stress and distortion will develop
B.Hot spots will develop
C.Fuel oil viscosity will increased
D.An increase in trapped deposits of scale and dirt
A.power and intake
B.intake and exhaust
C.exhaust and compression
D.compression and power
A.Hydraulic oil pressure
B.Servomotor action
C.Flyweight centrifugal force
D.Relay motion
A.low coolant temperature
B.insufficient fuel
C.high ambient temperature
D.carbon buildup on the injector tips
A.the splashing of lubrication oil by the crankshaft
B.the dilution of crankcase oil with particles of combustion
C.broken fuel lines spraying oil on the crankcase
D.the ignition of unburned fuel and air in the crankcase
最新試題
For a given exhaust gas boiler, what is the quantity of its evaporation mainly determined?（）
The ISPS Code consists of a mandatory section-Part A, which shows（）
If separating effect is not good, which measure should be taken （）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
Refrigerant entering the compressor of a refrigeration system should be in which of the following conditions?（）
The Port State Control officer may witness a fire drill carried out by the crew assigned to these duties on the（）
The cetane rating of diesel fuel is an indication of the （）
Using a file without a handle may result in （）
The additional mark （）in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?（）