A.opening more bypass lines
B.opening additional expansion valves
C.adding refrigerant
D.speeding up the machine
您可能感興趣的試卷
你可能感興趣的試題
A.manifold
B.condenser
C.chamber
D.plenum
A.defective thermal bulb
B.clogged scale trap
C.stuck high-pressure switch
D.stuck low-pressure switch
A.insufficient refrigeration
B.leaky suction valves
C.expansion valve stuck open
D.suction valve not adjusted properly
A.too much cooling water going through the condenser
B.not enough refrigerant in the system
C.a leak in the evaporator coils
D.no enough cooling water going through the condenser
A.king valve and the expansion valve
B.solenoid valve and expansion valve
C.evaporator and receiver
D.compressor and evaporator
最新試題
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is（）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
For a given exhaust gas boiler, what is the quantity of its evaporation mainly determined?（）
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the（）
（）are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.
Engine parameters shall be corresponded to NOx Technical Files. This is required by （）
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to （）
Which of the following items don’t belong to dock repair works?（）
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
During the diesel engine running, the water level of F.W expansion tank should normally kept in the （） level of glass tube.