A.backwards
B.forwards
C.upward
D.downwards
您可能感興趣的試卷
你可能感興趣的試題
A.air chamber
B.head lank
C.primer
D.prime mover
A.eye
B.hole
C.balance holes
D.opening
A.Carry out soot blowing if permissible
B.Change fuel supply to diesel oil
C.Close steam stop valves on boiler when pressure is reduced
D.Drain boiler empty when it has cooled down
A.blow
B.clean
C.scavenge
D.purge
A.main stern stop valve
B.auxiliary steam stop valve
C.scum valve
D.blow down valve
最新試題
When does auxiliary burner of incinerator put into operation? ()Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the()
Under MARPOL Code the ship to which it applies has to carry ()
Which of the listed governor characteristics will greatly affect the load sharing relationship between paralleled diesel generators?()
To shut down a diesel engine after it exceeds the set maximum speed,which type of device listed should be used?()
During the diesel engine running, the water level of F.W expansion tank should normally kept in the () level of glass tube.
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a()
The main purpose of port State control is not to()
For a given exhaust gas boiler, what is the quantity of its evaporation mainly determined?()
Which one is NOT the ‘clear grounds’ for a more detailed inspection?()