A.airification
B.vaporization
C.atomization
D.gasification
您可能感興趣的試卷
你可能感興趣的試題
A.reciprocating motion of exhaust valves
B.rotary motion of the camshaft
C.reciprocating motion of the piston
D.developed differential
A.dilutes the lube oil and reduces its viscosity
B.forms sulfuric acid in the lube oil
C.causes pitting and failure of the bearings
D.causes sludge deposits on valve stems
A.To provide accessibility to the cylinder liners
B.To add stability to the engine block
C.To add rigidity to the block and a surface for attaching other parts
D.To make a surface for the base
A.temperature of the exhaust gases
B.energy supplied to the turbocharger
C.air pressure to the intake manifold
D.purge of exhausted gases from the cylinders
A.increase in engine speed
B.increase in cylinder turbulence
C.leaking needle valve
D.reduction in cylinder turbulence
最新試題
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is（）
Which one is NOT the ‘clear grounds’ for a more detailed inspection?（）
Which of the listed governor characteristics will greatly affect the load sharing relationship between paralleled diesel generators?（）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
（） is not installed on the main switchboar.
The treatment of the fuel oils involves storage, heating, filtering and（）
The main purpose of port State control is not to（）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a（）
Which of the following items don’t belong to dock repair works?（）