A.excessive internal leakage in the pump
B.low discharge pressure and fluid flow
C.excessive fluid level in the hydraulic reservoir
D.operation of the pump at 100% efficiency
您可能感興趣的試卷
你可能感興趣的試題
A.need to repair
B.need to be repaired
C.needs to repair
D.needs repairing
A.to repair
B.to be repaired
C.repairing
D.being repaired
A.ago
B.before
C.ahead
D.front
A.excessive loads are placed on the winch
B.minimum pull is being exerted by the winch
C.automatic operation of the winch is desired
D.wire is being retrieved at the maximum rate
A.less internal corrosion because of lower brine density
B.higher temperature evaporation for lower salinity of the distillate produced
C.less scale formation in a flash evaporator
D.less feed-water required for a flash evaporator
最新試題
The ISPS Code consists of a mandatory section-Part A, which shows（）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
The treatment of the fuel oils involves storage, heating, filtering and（）
（）connectors hold best if a wire is accidentally pulled or a connection becomes loose.
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
Cold weather starting of a diesel engine may be made easier by（）
Refrigerant entering the compressor of a refrigeration system should be in which of the following conditions?（）
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated（）
Which of the following items don’t belong to dock repair works?（）