A.excessive loads are placed on the winch
B.minimum pull is being exerted by the winch
C.automatic operation of the winch is desired
D.wire is being retrieved at the maximum rate
您可能感興趣的試卷
你可能感興趣的試題
A.less internal corrosion because of lower brine density
B.higher temperature evaporation for lower salinity of the distillate produced
C.less scale formation in a flash evaporator
D.less feed-water required for a flash evaporator
A.clarifier
B.oil/water separator
C.incinerator
D.distiller
A.booster pump
B.evaporator
C.incinerator
D.cooler
A.wax precipitation in the lube oil
B.contamination by dust, scale, or moisture
C.refrigerant bubbles in the lube oil
D.refrigerant reducing the lube oil viscosity
A.increasing refrigerant pressure in the coil
B.increasing chilled water flow through the cooler
C.sub-cooling the refrigerant in the condenser
D.superheating the refrigerant in the compressor
最新試題
Engine parameters shall be corresponded to NOx Technical Files. This is required by ()
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is()
The cetane rating of diesel fuel is an indication of the ()
If separating effect is not good, which measure should be taken ()
Under MARPOL Code the ship to which it applies has to carry ()
Which of the listed governor characteristics will greatly affect the load sharing relationship between paralleled diesel generators?()
To shut down a diesel engine after it exceeds the set maximum speed,which type of device listed should be used?()
()are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to ()
The treatment of the fuel oils involves storage, heating, filtering and()