A.clarifier
B.oil/water separator
C.incinerator
D.distiller
您可能感興趣的試卷
你可能感興趣的試題
A.booster pump
B.evaporator
C.incinerator
D.cooler
A.wax precipitation in the lube oil
B.contamination by dust, scale, or moisture
C.refrigerant bubbles in the lube oil
D.refrigerant reducing the lube oil viscosity
A.increasing refrigerant pressure in the coil
B.increasing chilled water flow through the cooler
C.sub-cooling the refrigerant in the condenser
D.superheating the refrigerant in the compressor
A.control inlet air temperature
B.control inlet air volume
C.maintain relative humidity at 15%
D.restore conditioned air temperature to a comfortable level
A.bilge well connected to that valve, plus the second bilge well being pumped will be completely emptied
B.bilge system will lose vacuum and prevent the other bilges from being pumped out
C.bilge well aft connected to that valve will siphon its contents to the forward bilge wells
D.discharge pressure will be too high
最新試題
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is（）
Using a file without a handle may result in （）
（）are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.
The ISPS Code consists of a mandatory section-Part A, which shows（）
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?（）
Cold weather starting of a diesel engine may be made easier by（）
Under MARPOL Code the ship to which it applies has to carry （）
Engine parameters shall be corresponded to NOx Technical Files. This is required by （）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
The treatment of the fuel oils involves storage, heating, filtering and（）