A.condensation in the fuel tank
B.a crack in the hull portion of the fuel tank
C.a load of bad fuel
D.contamination from the saltwater flushing system
您可能感興趣的試卷
你可能感興趣的試題
A.sounding the tank
B.waiting for the vessel to list
C.examining tank boundaries
D.checking fuel oil strainers
A.on the outgoing tide
B.overboard after dark
C.overboard through an oily water separator
D.anytime in an emergency, i-emain engine lube oil failure
A.drained into the vessels bilges
B.reclaimed for other uses
C.held in a slop tank
D.purified and then reused
A.when the remaining charge volume is less than 90 percent of the required VOLUME
B.at each inspection for certification
C.at each annual inspection
D.when the weight loss exceeds 10% of weight of charge
A.welding brackets across both ends of the crack
B.chipping out and slot welding the entire crack
C.drilling a hole at each end of the crack
D.cutting a square notch at each end of the crack
最新試題
Which of the listed governor characteristics will greatly affect the load sharing relationship between paralleled diesel generators?()
Which one is NOT the ‘clear grounds’ for a more detailed inspection?()
The treatment of the fuel oils involves storage, heating, filtering and()
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the()
()connectors hold best if a wire is accidentally pulled or a connection becomes loose.
Refrigerant entering the compressor of a refrigeration system should be in which of the following conditions?()
Which of the diesel engine components listed increase air density and helps to improve engine operating efficiency?()
If two A.C.generators are to be operated in parallel, the load is distributed evenly by()
To shut down a diesel engine after it exceeds the set maximum speed,which type of device listed should be used?()
For a given exhaust gas boiler, what is the quantity of its evaporation mainly determined?()