單項選擇題When oily water separator is operating, which measure （） is wrong.

A.pay attention to operating parameters
B.renew and clean separating units in time
C.check oil level in separator to prevent overload
D.check separating effect, if it is bad, flush with large capacity water pump


您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題The following measures can be used to improve oily water separator’s separating effect except （）

A.overhauling every two year
B.working at intervals
C.renewing filtration material
D.pumping bilge water from different layers respectively

2.單項選擇題If separating effect is not good, which measure should be taken （）

A.working at intervals and properly heating
B.warming up to 70℃, increase water supply flow
C.improving impulse of water supply
D.reducing water supply flow

3.單項選擇題If separating effect is not good, we can improve it by （）

A.flushing separator with hot water
B.increasing water supply flow
C.heat oily water properly
D.opening manual oil discharge value

4.單項選擇題If found oil when we open low oil level plug of separator, it indicates （）

A.the separator is overload
B.the monitor equipment of separator fails
C.the discharge pump of separator can not work
D.the temperature of oil water is low

5.單項選擇題After stopping oily water separator, sea water should be permitted for （） minutes,（）should be closed after stopping pump to reduce oxidation corrosion of inner wall.

A.15；inlet value
B.15；inlet and outlet value
C.30；inlet value
D.30；inlet and outlet value