A.the separator is overload
B.the monitor equipment of separator fails
C.the discharge pump of separator can not work
D.the temperature of oil water is low
您可能感興趣的試卷
你可能感興趣的試題
A.15；inlet value
B.15；inlet and outlet value
C.30；inlet value
D.30；inlet and outlet value
A.filled with bilge water
B.filled with oil
C.filled with clean water
D.be emptied
A.the sensor of low oil level is fully covered by sludge
B.the coarse strainer before the pump in suction system is clogged
C.the screw pump is worn seriously and volumetric efficiency is decreased
D.bilge suction value is clogged
A.the filter is clogged
B.bilge suction value is clogged
C.suction value and discharge value of the pump do not open fully
D.screw pump is worn seriously and volumetric efficiency is decreased
A.separating oil too fast
B.the sensor flushed badly
C.the discharge solenoid value out of order
D.too low heating temperature
最新試題
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
Diesel engine air start system check valves are opened by （）
The shipboard oil pollution emergency plan will be invalid after （）
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to （）
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?（）
Using a file without a handle may result in （）
During the diesel engine running, the water level of F.W expansion tank should normally kept in the （） level of glass tube.
Engine parameters shall be corresponded to NOx Technical Files. This is required by （）
Under MARPOL Code the ship to which it applies has to carry （）