A.overhauling every two year
B.working at intervals
C.renewing filtration material
D.pumping bilge water from different layers respectively
您可能感興趣的試卷
你可能感興趣的試題
A.working at intervals and properly heating
B.warming up to 70℃, increase water supply flow
C.improving impulse of water supply
D.reducing water supply flow
A.flushing separator with hot water
B.increasing water supply flow
C.heat oily water properly
D.opening manual oil discharge value
A.the separator is overload
B.the monitor equipment of separator fails
C.the discharge pump of separator can not work
D.the temperature of oil water is low
A.15；inlet value
B.15；inlet and outlet value
C.30；inlet value
D.30；inlet and outlet value
A.filled with bilge water
B.filled with oil
C.filled with clean water
D.be emptied
最新試題
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated（）
Cold weather starting of a diesel engine may be made easier by（）
Diesel engine air start system check valves are opened by （）
（）are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.
If two A.C.generators are to be operated in parallel, the load is distributed evenly by（）
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a（）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
The cetane rating of diesel fuel is an indication of the （）
The main purpose of port State control is not to（）