A.pressure does not fluctuate rapidly
B.pressure remains steady and unchanged
C.brine density does not exceed 1~5
D.brine density is too low
您可能感興趣的試卷
你可能感興趣的試題
A.moisture emulsification of the bearing grease
B.insufficient circulation and overheating of the bearing
C.proper grease circulation to cool the bearing
D.sliding friction between balls and races
A.oil fires in the engine room bilges
B.class B fires in paint lockers
C.any class D fire
D.all of the above
A.natural circulation of the water in the water tube boiler is better than that in the fire tube boiler
B.for the same output the water tube boiler will carry less mass of water compared with the fire tube boiler
C.the water tube boiler will cost shorter time for steam raising
D.the water tube boiler require lower skill in operating and maintaining
A.the direct acting relief valve is used for controlling lower flows and pressure
B.the pilot operated relief valve is used for controlling higher flows and pressure
C.the pilot operated relief valve is used for controlling lower flows and pressure
D.the controlling accuracy of direct acting relief valve is worse than that of the pilot operated relief valve
A.electric motor
B.hydraulic motor
C.compressed air
D.turning gear
最新試題
Which of the diesel engine components listed increase air density and helps to improve engine operating efficiency?()
For a given exhaust gas boiler, what is the quantity of its evaporation mainly determined?()
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a()
The main purpose of port State control is not to()
If separating effect is not good, which measure should be taken ()
The condensers located in various stages of a flash evaporator are cooled by()
The ISPS Code consists of a mandatory section-Part A, which shows()
The additional mark ()in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
During the diesel engine running, the water level of F.W expansion tank should normally kept in the () level of glass tube.
()connectors hold best if a wire is accidentally pulled or a connection becomes loose.