A.remove the discharge ring
B.re-prime the purifier
C.the centrifuge to its proper speed
D.install an additional discharge ring
您可能感興趣的試卷
你可能感興趣的試題
A.flattening of the bowl neoprene O-rings
B.operation within the explosive rang of the fuel
C.excessive purifier operating pressures
D.excessive oil viscosity
A.Carbon particles
B.Lube oil
C.Gasoline
D.Diesel fuel
A.Contamination of the lube oil by emulsification will result
B.The lube oil will not be subjected to the proper centrifugal force
C.The lube oil will overheat and flash
D.Oil will discharge from the heavy phase discharge port and be wasted
A.rated capacity of that purifier
B.viscosity of the oil being purified
C.maximum design speed of that purifier
D.specific gravity of the oil being purified
A.the purifier driving gears are lubricated by the reclaimed
B.oil as it leaves the bowl all dirt and sludge are automatically discharged with the cooling water
C.sealing water must never be supplied until after oil is fed to the unit
D.deterioration of the bowl ring gasket will cause the purifier to lose its water seal
最新試題
If separating effect is not good, which measure should be taken （）
The treatment of the fuel oils involves storage, heating, filtering and（）
Diesel engine air start system check valves are opened by （）
The ISPS Code consists of a mandatory section-Part A, which shows（）
During the diesel engine running, the water level of F.W expansion tank should normally kept in the （） level of glass tube.
To proceed to the assistance of a ship in distress is（）
The Port State Control officer may witness a fire drill carried out by the crew assigned to these duties on the（）
The cetane rating of diesel fuel is an indication of the （）
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
Which one is NOT the ‘clear grounds’ for a more detailed inspection?（）