A.starting air pressure
B.scavenge air pressure
C.over-speed trip
D.banjo oiler line
您可能感興趣的試卷
你可能感興趣的試題
A.starting air pressure
B.scavenge air pressure
C.over-speed trip
D.banjo oiler line
A.engine speed
B.kilowatt load
C.fuel injection pressure
D.air intake manifold temperature
A.engine speed
B.engine load
C.intake manifold pressure
D.atmospheric pressure
A.glazed liners or pistons
B.high lube oil pressure
C.excessive compression ratio
D.worn valve seats and valves
A.governor droop
B.speeder spring tension
C.fuel rack lag
D.load on the engine
最新試題
Which one is NOT the ‘clear grounds’ for a more detailed inspection?（）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
Engine parameters shall be corresponded to NOx Technical Files. This is required by （）
The treatment of the fuel oils involves storage, heating, filtering and（）
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a（）
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the（）
Which of the diesel engine components listed increase air density and helps to improve engine operating efficiency?（）
The cetane rating of diesel fuel is an indication of the （）
The condensers located in various stages of a flash evaporator are cooled by（）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）