A.In a two-stroke/cycle engine, the rings run hotter, requiring the end gap to be greater
B.Some provision must be made in a two-stroke/cycle engine to keep the rings from binding in the ports
C.No gap is required to exist between the ends of the ring when cold in a two-stroke/cycle engine, but a small gap is required in a four-stoke/cycle engine
D.The gaps should be staggered on either side of a piston in a two-stroke/cycle engine, while staggering is not necessary in a four-stroke/cycle engine
您可能感興趣的試卷
你可能感興趣的試題
A.Open the crankcase immediately to check for damage
B.Apply fire fighting water through the crankcase breather
C.Allow the engine to cool before opening the crankcase
D.Assume that there is no damage to the crankshaft
A.carbon
B.vanadium
C.calcium
D.hydrogen
A.Intake manifold pressure will be high
B.Intake manifold pressure will be unaffected
C.Exhaust temperatures will be high
D.Exhaust temperatures will be low
A.an electric grinder
B.a metal scraper
C.a reamer
D.a three-wing hone
A.Faulty turbocharger turbine diffuser ring
B.Faulty turbocharger compressor ring
C.Insufficient cooling water flow
D.Clogged air intake filters
最新試題
To proceed to the assistance of a ship in distress is（）
（） is not installed on the main switchboar.
Which of the listed governor characteristics will greatly affect the load sharing relationship between paralleled diesel generators?（）
If separating effect is not good, which measure should be taken （）
Cold weather starting of a diesel engine may be made easier by（）
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the（）
During the diesel engine running, the water level of F.W expansion tank should normally kept in the （） level of glass tube.
Which one is NOT the ‘clear grounds’ for a more detailed inspection?（）
Flame failure in an automatically fired auxiliary boiler can from a/an （）
The main purpose of port State control is not to（）