A.temperature of compression
B.atomization of the fuel
C.penetration of the fuel
D.all of the above
您可能感興趣的試卷
你可能感興趣的試題
A.low loading of that cylinder
B.faulty combustion in that cylinder
C.sluggish piston ring action
D.excessive piston cooling
A.low oil pressure
B.high coolant pressure
C.leaking fuel injector
D.cracked cylinder head or liner
A.speed limiting governor
B.variable speed governor
C.constant speed governor
D.load limiting governor
A.high cost of fuel
B.serious fire hazard
C.possibility of pollution
D.poor combustion which will occur in that cylinder
A.lube cooler failure
B.poor heat transfer
C.mechanical lubricator failure
D.camshaft seizure
最新試題
Flame failure in an automatically fired auxiliary boiler can from a/an （）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
If separating effect is not good, which measure should be taken （）
The treatment of the fuel oils involves storage, heating, filtering and（）
Which one is NOT the ‘clear grounds’ for a more detailed inspection?（）
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is（）
The shipboard oil pollution emergency plan will be invalid after （）
Engine parameters shall be corresponded to NOx Technical Files. This is required by （）
Cold weather starting of a diesel engine may be made easier by（）
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated（）