A.one automatic drain serving both containers
B.two air starting containers of approximately equal size
C.one control air container and one starting air container
D.one additional means of starting the main engine
您可能感興趣的試卷
你可能感興趣的試題
A.prevent heat corrosion to internal components
B.increase fuel delivery rate and economy
C.prevent pre-ignition
D.avoid carbonization of the nozzle tips
A.loss of suction in the circulating pump
B.leak in the primary cooling system
C.broken raw water pump shaft
D.burned or cracked piston in one cylinder
A.avoid using liquid-cooled nozzles whenever possible
B.avoid low cooling water temperatures
C.avoid prolonged overloading of the engine
D.make certain the gasket seal between the nozzle and cylinder head is tight
A.centrifugal force rotates the ball-head
B.flyweight centrifugal force is balanced by spring force
C.flyweight centrifugal force is balanced by hydraulic pressure
D.speeder spring alone actuates the fuel control rod
A.too light of a load
B.injection timing is too early
C.overloading of the engine
D.too low of a compression ratio
最新試題
To shut down a diesel engine after it exceeds the set maximum speed,which type of device listed should be used?()
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated()
The treatment of the fuel oils involves storage, heating, filtering and()
Diesel engine air start system check valves are opened by ()
()are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.
To proceed to the assistance of a ship in distress is()
The main purpose of port State control is not to()
When does auxiliary burner of incinerator put into operation? ()Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
Cold weather starting of a diesel engine may be made easier by()
Refrigerant entering the compressor of a refrigeration system should be in which of the following conditions?()