A.loss of suction in the circulating pump
B.leak in the primary cooling system
C.broken raw water pump shaft
D.burned or cracked piston in one cylinder
您可能感興趣的試卷
你可能感興趣的試題
A.avoid using liquid-cooled nozzles whenever possible
B.avoid low cooling water temperatures
C.avoid prolonged overloading of the engine
D.make certain the gasket seal between the nozzle and cylinder head is tight
A.centrifugal force rotates the ball-head
B.flyweight centrifugal force is balanced by spring force
C.flyweight centrifugal force is balanced by hydraulic pressure
D.speeder spring alone actuates the fuel control rod
A.too light of a load
B.injection timing is too early
C.overloading of the engine
D.too low of a compression ratio
A.caused by retarded injection timing
B.caused by a mechanical defect in one cylinder
C.caused by high fuel injection pressures
D.normal for these conditions
A.an air bound fuel system
B.damage to cylinder heads and pistons
C.excessive fuel injection
D.excessive air valve lift
最新試題
() is not installed on the main switchboar.
Which of the following items don’t belong to dock repair works?()
Cold weather starting of a diesel engine may be made easier by()
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is()
()connectors hold best if a wire is accidentally pulled or a connection becomes loose.
Diesel engine air start system check valves are opened by ()
If two A.C.generators are to be operated in parallel, the load is distributed evenly by()
If separating effect is not good, which measure should be taken ()
The ISPS Code consists of a mandatory section-Part A, which shows()
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?()