A.Exhaust temperature
B.Lube oil level
C.Lube oil pressure
D.Water level in the expansion tank
您可能感興趣的試卷
你可能感興趣的試題
A.maximum power at a normal load
B.maximum power and load under normal conditions
C.half speed and normal temperature
D.normal operating temperature without a load
A.lube oil temperature at the cooler outlet
B.lube oil strainer magnets bearing
C.lube oil temperature
D.lube oil pressure to the bearing
A.the pump supply pressure
B.the slope of the fuel cam
C.how the plunger is rotated
D.the number of sleeve segments engaged with the rack
A.air binding of the engine cooling system
B.a cracked water cooled exhaust manifold
C.blockage in the heat exchanger
D.faulty operation of the thermostat
A.decrease in ignition lag
B.increase in fuel economy
C.reduction in lube oil viscosity
D.increase in cylinder misfiring
最新試題
Using a file without a handle may result in （）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the（）
（）are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.
（）connectors hold best if a wire is accidentally pulled or a connection becomes loose.
Under MARPOL Code the ship to which it applies has to carry （）
The condensers located in various stages of a flash evaporator are cooled by（）
Which one is NOT the ‘clear grounds’ for a more detailed inspection?（）
Engine parameters shall be corresponded to NOx Technical Files. This is required by （）
Flame failure in an automatically fired auxiliary boiler can from a/an （）