A.the pump supply pressure
B.the slope of the fuel cam
C.how the plunger is rotated
D.the number of sleeve segments engaged with the rack
您可能感興趣的試卷
你可能感興趣的試題
A.air binding of the engine cooling system
B.a cracked water cooled exhaust manifold
C.blockage in the heat exchanger
D.faulty operation of the thermostat
A.decrease in ignition lag
B.increase in fuel economy
C.reduction in lube oil viscosity
D.increase in cylinder misfiring
A.No fuel will be delivered
B.The maximum effective stroke will be attained
C.The fuel delivered to the cylinder will be excessive
D.The injection nozzle will overheat and carbonize
A.have a larger than normal dead band
B.produce excessive speed response to a load change
C.respond slowly to any change in engine load
D.stabilize engine speed at the new governor setting
A.plating forming the engine room tank top
B.doubler plating installed over the flat keel plate
C.a watertight boundary formed by the inner bottom
D.compartments between the inner and outer bottoms
最新試題
The additional mark （）in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
Cold weather starting of a diesel engine may be made easier by（）
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
（）connectors hold best if a wire is accidentally pulled or a connection becomes loose.
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the（）
Engine parameters shall be corresponded to NOx Technical Files. This is required by （）
During the diesel engine running, the water level of F.W expansion tank should normally kept in the （） level of glass tube.
The condensers located in various stages of a flash evaporator are cooled by（）
（） is not installed on the main switchboar.
Flame failure in an automatically fired auxiliary boiler can from a/an （）