A.have a larger than normal dead band
B.produce excessive speed response to a load change
C.respond slowly to any change in engine load
D.stabilize engine speed at the new governor setting
您可能感興趣的試卷
你可能感興趣的試題
A.plating forming the engine room tank top
B.doubler plating installed over the flat keel plate
C.a watertight boundary formed by the inner bottom
D.compartments between the inner and outer bottoms
A.auto-ignition point
B.flash point
C.burning temperature
D.fire point
A.double bottom fuel oil tank temperature
B.heater supply steam flow
C.pressure of the fuel supplied to the burners
D.attemperator steam flow in the heater discharge circuit
A.have no plating joints of 90
B.retain the lube oil as long as possible before it recirculates through the system
C.provided drain/return lines that are no greater than 24 inches from the pump suction
D.be provided with only a perfectly horizontal bottom
A.cause an alarm condition
B.secure power to the indicator
C.secure power to the monitored device
D.automatically recluse within 10 seconds
最新試題
During the diesel engine running, the water level of F.W expansion tank should normally kept in the () level of glass tube.
The cetane rating of diesel fuel is an indication of the ()
If separating effect is not good, which measure should be taken ()
When does auxiliary burner of incinerator put into operation? ()Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
To shut down a diesel engine after it exceeds the set maximum speed,which type of device listed should be used?()
To proceed to the assistance of a ship in distress is()
Engine parameters shall be corresponded to NOx Technical Files. This is required by ()
The main purpose of port State control is not to()
Which of the following items don’t belong to dock repair works?()
() is not installed on the main switchboar.