A.opposes any change in the applied voltage
B.opposes any change in the current flow through the circuit
C.aids any changes in the applied voltage
D.aids any changes in the current through the circuit
您可能感興趣的試卷
你可能感興趣的試題
A.low loads necessitate frequent insulation cleaning
B.exceeding nameplate values shortens useful life
C.energy is wasted if full loading is not utilized
D.power factor correction methods are load dependent
A.The generator and bus transfer section
B.The 450 volt, 60 cycle, 3 phase bus
C.The 120 volt, 3 phase, 60 cycle bus
D.The 24 volt DC bus
A.increases as the square of the current
B.decreases as the square root of the current
C.remains the same, as it is independent of current flow
D.increases in direct proportion as the current
A.1 volt, the output changes 5 volts
B.5 volts, the output changes 1 volt
C.5 volts, the output changes 10 volts
D.10 volts, the output changes 5 volts
A.Circulating currents are kept to a minimum
B.Field excitation losses are kept to a minimum
C.Generator rotors will have a lesser tendency to hunt
D.Because a power factor increase will decrease kilowatt output
最新試題
The main purpose of port State control is not to（）
The ISPS Code consists of a mandatory section-Part A, which shows（）
Which one is NOT the ‘clear grounds’ for a more detailed inspection?（）
The Port State Control officer may witness a fire drill carried out by the crew assigned to these duties on the（）
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the（）
Which of the following items don’t belong to dock repair works?（）
Diesel engine air start system check valves are opened by （）
（） is not installed on the main switchboar.
Under MARPOL Code the ship to which it applies has to carry （）
During the diesel engine running, the water level of F.W expansion tank should normally kept in the （） level of glass tube.