A.data marked with DSCP AF21，VOIP marked with DSCP EF
B.data marked with DSCP AF51，VOIP marked with DSCP EF
C.data marked with the DE-bit. VOIP marked with the CLP-bit
D.data marked with DSCP EF，VOIP marked with DSCP AF31
E.data marked with IP precedence 5，VOIP marked with DSCP EF
您可能感興趣的試卷
你可能感興趣的試題
A.mark VOIP traffic with IP precedence 6 and configure only fair-queue’ on the links
B.configure the scheduler allocate 3000 1000 command to allow the OoS code to have enough CPU cycles
C.enable class-based traffic shaping on the VOIP traffic class
D.enable Layer 2 fragmentation and interleaving on the links
E.enable Frame Relay on the links and send voice and data on different Frame Relay PVCs
A.1） lowest root bridge id，2） lowest sender bridge id，3） lowest port id，4） lowest root path cost
B.1） lowest root path cost，2） lowest root bridge id，3） lowest sender bridge id，4） lowest sender port id
C.1） lowest root bridge id，2） lowest sender bridge id，3） lowest root path cost，4） lowest sender port id
D.1） lowest root bridge id，2） lowest root path cost，3） lowest sender bridge id，4） lowest sender port id
A.VTP updates are ignored and forwarded out all ports.
B.VTP updates are ignored and forwarded out trunks only.
C.VTP updates are made to the VLAN database and are forwarded out trunks only.
D.VTP updates are ignored and are not forwarded.
A.8192
B.16384
C.49152
D.65535
A.Designated Root Cost
B.bridge ID priority
C.max age
D.bridge ID MAC address
E.Designated Root Priority
F.forward delay
最新試題
In Layer 2 topologies， spanning-tree failures can cause loops in the network. These unblocked loops cancause network failures because of excessive traffic. Which two Catalyst 6500 features can be used to limitexcessive traffic during spanning-tree loop conditions？（）
What is the correct command to set the router ID for an OSPFv3 process？（）
Based on the exhibit presented. What will be the objective of this route map when applied to traffic passing through a router？（）
Which three options are valid ways to filter routes from a BGP peer？（）
You are the network administrator of an enterprise with a main site and multiple remote sites. Your networkcarries both VOIP and data traffic. You agree with your service provider to classify VOIP and data trafficaccording to the different service RFCs. How can your data and VOIP traffic be marked？（）
In order to configure two routers as anycast RPs， which of these requirements， af a minimum， must besatisfied？（）
Which two of these are used in the selection of a root bridge in a network utilizing Spanning Tree ProtocolIEEE 802.1 D？（）
An expanding company is deploying leased lines between its main site and two remote sites. Thebandwidth of the leased lines is 128kb/s each，terminated on different serial interfaces on the main router.These links are used for combined VOIP and data traffic. The network administrator has implemented a VOIP solution to reduce costs，and has therefore reserved sufficient bandwidth in a low latency queue oneach interface for the VOIP traffic. Users now complain about bad voice quality although no drops areobserved in the low latency queue. What action will likely fix this problem？（）
Which three message types are valid PIMv2 message types？（）
What is true about Unicast RPF in strict mode？（）