A.Attempt to TELNET from the router connected to the inside of the firewall to the router connected to theoutside of the firewall. If telnet works， BGP will work， since telnet and BGP both use TCP to transportdata.
B.Ping from the router connected to the inside interface of the firewall to the router connected to theoutside interface of the firewall. If you can ping between them， BGP should work， since BGP uses IP totransport packets.
C.There is no way to make BGP work across a firewall without special configuration， so there is no simpletest that will show you if BGP will work or not， other than trying to start the peering session.
D.There is no way to make BGP work across a firewall.
您可能感興趣的試卷
你可能感興趣的試題
A.ip pim rp-address
B.ip pim ssm
C.ip pim sparse-mode
D.ip pim passive
A.MD5
B.There is no Type 0 authentication
C.SHA1
D.Null
A.UDP/1812
B.UDP/1813
C.TCP/1812
D.TCP/1813
A.The MPLS header is 2 bytes，and the EXP field is 3 bits long.
B.The MPLS header is 1 byte，and the EXP field is 3 bits long.
C.The MPLS header is 4 bytes，and the EXP field is 3 bits long.
D.The MPLS header is 3 bytes，and the EXP field is 3 bits long.
A.RED randomly drops packets before the queue becomes full.
B.RED is always useful，without dependency on flow.
C.RED increases the drop rate as the average queue size increases.
D.RED has a per-flow intelligence.
最新試題
The classic Spanning Tree Protocol （802.1 D 1998） uses which sequence of variables to determine thebest received BPDU？（）
In PIM-SM what control plane signaling must a multicast source perform before it begins to send multicasttraffic to a group？（）
Two routers configured to run BGP have been connected to a firewall， one on the inside interface and one on the outside interface. BGP has been configured so the two routers should peer， including the correctBGP session endpoint addresses and the correct BGP session hop-count limit EBGP multihop. What is agood first test to see if BGP will work across the firewall？（）
When STP UplinkFast is enabled on a switch utilizing the default bridge priority， what will the new bridgepriority be changed to？（）
Which two are differences between IGMPv2 and IGMPv3 reports？（）
Based on the output provided in the exhibit， to which address or location will the router forward a packet sent to 192.168.32.1？（）
In GLBP，which router will answer on client ARP requests？（）
What is true about Unicast RPF in strict mode？（）
Which three options are valid ways to filter routes from a BGP peer？（）
Which two of these are used in the selection of a root bridge in a network utilizing Spanning Tree ProtocolIEEE 802.1 D？（）