A.high-pressure cutout switch is jammed open
B.low-pressure switch is jammed shut
C.thermal bulb is not operating properly
D.scale trap is clogged
您可能感興趣的試卷
你可能感興趣的試題
A.in the middle of evaporator coils
B.near the evaporator coil outlet
C.near the evaporator coil inlet
D.on the bottom row of evaporator coils
A.amount of superheat in the vapor leaving the coil
B.amount of superheat in the liquid
C.temperature in the evaporator coils
D.pressure in the evaporator coils
A.stop the refrigerant from flowing
B.force the refrigerant to flow
C.cause the refrigerant pressure to rise
D.cause the refrigerant pressure to fall
A.the expansion valve will move toward the wide open position
B.the expansion valve will move toward the closing position
C.the feeler bulb will conveys the high temperature
D.the superheat degree will raise
A.move in an opening direction
B.move in a closing direction
C.either open or close
D.not move at all
最新試題
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to （）
Cold weather starting of a diesel engine may be made easier by（）
Which of the listed governor characteristics will greatly affect the load sharing relationship between paralleled diesel generators?（）
Under MARPOL Code the ship to which it applies has to carry （）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
The main purpose of port State control is not to（）
The condensers located in various stages of a flash evaporator are cooled by（）
For a given exhaust gas boiler, what is the quantity of its evaporation mainly determined?（）
The cetane rating of diesel fuel is an indication of the （）
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）