單項選擇題Which action should be taken when an auxiliary boiler in is operation?（）

A.Clean all electrical connections
B.Lift the relief valves by hand
C.Inspect and clean all solenoid valves
D.Inspect for oil and water leaks


您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題Ignition failure in an automatically controlled auxiliary boiler could be caused by（）

A.carbon deposits on the flame scanner
B.high fuel oil temperature
C.low fuel oil viscosity
D.high steam pressure

2.單項選擇題Heavy soot accumulations in an auxiliary boiler could be caused by（）

A.water in the fuel oil
B.excessive cycling
C.high fuel oil pressure
D.improper burner maintenance

3.單項選擇題The purpose of the programmed purge cycle on an automatically fired auxiliary boiler is to（）

A.cool the furnace to prevent pre-ignition
B.remove explosive vapors from the furnace
C.evaporate accumulated unburned fuel oil
D.provide sufficient air in the furnace to allow ignition of the fuel

4.單項選擇題The boiler water alkalinity in a coil-type auxiliary boiler should be maintained at the pH recommended by the boiler manufacturer to（）

A.precipitate silica from solution
B.reduce corrosion in the heating coil
C.prevent clogging and erosion in the coil
D.maintain zero water hardness

5.單項選擇題Diesel engine waste heat boiler construction is usually of the fire-tube or（）

A.cyclone furnace boiler type
B.dry back boiler type
C.water-tube type
D.critical circulation boiler type