A.Lubrication to the defective cylinder should be increased
B.Cooling water temperature to the engine should be increased
C.Only the turbocharger speed should be reduced
D.Engine speed should be reduced
您可能感興趣的試卷
你可能感興趣的試題
A.incorrect injection timing
B.low exhaust back pressure
C.floating exhaust valves
D.excessive cranking speed
A.electrical overload
B.surging at governed RPM
C.loose engine mounting bolts
D.coolant leaking into the cylinder
A.check the air filter for obstruction
B.check for an exhaust leak
C.check the exhaust temperature
D.secure the engine
A.over-speeding of the engine
B.failure of the engine to shut down
C.no effect of engine mounting bolts
D.high exhaust temperatures
A.low lube oil temperature
B.low starting air temperature
C.air bubbles in the fuel oil system
D.water in the starting air system
最新試題
Flame failure in an automatically fired auxiliary boiler can from a/an （）
The treatment of the fuel oils involves storage, heating, filtering and（）
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated（）
The shipboard oil pollution emergency plan will be invalid after （）
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the（）
The main purpose of port State control is not to（）
The cetane rating of diesel fuel is an indication of the （）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
If separating effect is not good, which measure should be taken （）
Using a file without a handle may result in （）