A.pumping action of the piston
B.pressure of the fuel charge
C.vacuum developed in the manifold
D.pressure of the fresh air charge
您可能感興趣的試卷
你可能感興趣的試題
A.Electric power and starting air
B.Lube oil standby pump and control air
C.Hydraulic switch and engage jacking gear
D.Motor drain and pneumatic control system power
A.engine overload
B.leaky valves
C.stuck or broken piston rings
D.low air injection pressure
A.Corrosion and eventual failure of the tank
B.Gumming of the tank relief valves
C.Immediate failure of components downstream of the compressed air system
D.Boiling of the water oil mixture as pressure is reduced
A.effective cylinder scavenging and cooling
B.constant pressure from the turbochargers
C.cooler operation of the exhaust system
D.effective constant pressure for turbocharger operation
A.Lubrication
B.Cooling
C.Fuel
D.Electric ignition
最新試題
If two A.C.generators are to be operated in parallel, the load is distributed evenly by（）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
Which of the following items don’t belong to dock repair works?（）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated（）
Cold weather starting of a diesel engine may be made easier by（）
Which of the diesel engine components listed increase air density and helps to improve engine operating efficiency?（）
If separating effect is not good, which measure should be taken （）
Under MARPOL Code the ship to which it applies has to carry （）
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）