A.ignition quality of the fuel
B.calorific value of the fuel
C.flash point of the fuel
D.rate of fuel consumption
您可能感興趣的試卷
你可能感興趣的試題
A.Viscosity
B.acid content
C.heating value
D.ignition quality
A.Viscosity
B.Sulfur content
C.Pour point
D.Cetane number
A.Exhaust energy would draw excess air
B.The inertia of the turbocharger rotor causes a time lag which delays the turbocharger speed increase
C.Exhaust gas pumping losses are increased due to turbine windage
D.Exhaust gas back pressure falls slightly due to increased nozzle action
A.use of low viscosity oil in cold weather
B.increased moisture content of inlet air in cold weather
C.increased drag of pistons and bearings due to increased oil viscosity
D.higher compression pressures reached due to smaller clearances existing in the engine during cold weather
A.octane number
B.cetane number
C.viscosity in Saybolt seconds
D.air fuel ratio
最新試題
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to （）
The condensers located in various stages of a flash evaporator are cooled by（）
Under MARPOL Code the ship to which it applies has to carry （）
The main purpose of port State control is not to（）
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?（）
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the（）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
（）are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.
Flame failure in an automatically fired auxiliary boiler can from a/an （）
The treatment of the fuel oils involves storage, heating, filtering and（）