A.The cylinder indicator cocks should be opened
B.The sump lube oil scavenge pump should be secured immediately
C.The explosion relief valves should be manually opened
D.The crankcase should remain unopened until the engine has cooled
您可能感興趣的試卷
你可能感興趣的試題
A.turbocharger malfunction or failure
B.crankcase exhauster overload
C.overload on the intercooler
D.obstruction in the engine cylinders
A.inspection covers should not be opened until the engine has cooled
B.ventilation system should be continued in operation for one hour for cooling
C.scavenge pump should be immediately secured to prevent loss of lube oil
D.explosion covers should be opened slightly to provide extra ventilation
A.high flash point and high viscosity
B.low flash point and high viscosity
C.low heating value and high sulphur content
D.high heating value and low sulphur content
A.Full power cannot be developed
B.The exhaust will contain black smoke
C.Complete combustion will be impossible
D.All of the above
A.immediately open all crankcase relief ports
B.increase crankcase exhauster speed to draw cool air into the engine
C.allow the engine to cool naturally
D.increase crank case scavenge air to remove unburned gases
最新試題
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?（）
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a（）
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to （）
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated（）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
Which of the diesel engine components listed increase air density and helps to improve engine operating efficiency?（）
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is（）
Engine parameters shall be corresponded to NOx Technical Files. This is required by （）
During the diesel engine running, the water level of F.W expansion tank should normally kept in the （） level of glass tube.
If separating effect is not good, which measure should be taken （）