A.distilling condenser
B.salt water feed heater
C.distillate cooler
D.flash chamber
您可能感興趣的試卷
你可能感興趣的試題
A.higher than the first stage feed-water temperature and absolute shell pressure
B.lower than the first stage feed-water temperature and absolute shell pressure
C.the same as the first stage feed-water temperature and absolute shell pressure
D.not related to the feed-water temperature and absolute shell pressure
A.lowering brine discharge density
B.decreasing the absolute pressure of each stage
C.increasing the saltwater feed heater temperature
D.increasing the pressure at the spray pipe
A.Bedplate
B.Block
C.Base
D.Sump
A.clearance between the top of the valve stem and the rocker arm
B.compression of the valve springs
C.clearance between the valve seat inserts and the head
D.out of roundness of the fuel injection cams
A.low lube oil temperature
B.low lube oil pressure
C.high exhaust temperature
D.high cooling water pressure
最新試題
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the（）
Using a file without a handle may result in （）
To proceed to the assistance of a ship in distress is（）
During the diesel engine running, the water level of F.W expansion tank should normally kept in the （） level of glass tube.
The ISPS Code consists of a mandatory section-Part A, which shows（）
（） is not installed on the main switchboar.
For a given exhaust gas boiler, what is the quantity of its evaporation mainly determined?（）
If separating effect is not good, which measure should be taken （）
If two A.C.generators are to be operated in parallel, the load is distributed evenly by（）