A.60
B.120
C.180
D.360
您可能感興趣的試卷
你可能感興趣的試題
A.copper and antimony
B.steel and babbitt
C.aluminum or beryllium alloy
D.zinc or an alloy of tin and lead
A.prevent grounds in branch circuits
B.prevent opens in motor circuits
C.permit momentary overloads without melting
D.guard lighting and electronic circuits
A.Each has three separate but identical armature windings acted on by one system of rotating magnets
B.Each has one armature winding acted on by three identical but separate systems of rotating magnets
C.All three-phase alternators are designed to operate with a O8 leading power factor
D.The three phases always provide power to the load through three sets of slip rings and brushes
A.eliminate slippage
B.provide excitation
C.provide starting torque
D.increase efficiency
A.wash it with fresh water and apply an external source of heat
B.renew the windings
C.send it ashore to an approved service facility
D.rinse all electrical parts with a carbon tetrachloride cleaning solvent and then blow dry the motor with compressed air
最新試題
Using a file without a handle may result in ()
Engine parameters shall be corresponded to NOx Technical Files. This is required by ()
The main purpose of port State control is not to()
During the diesel engine running, the water level of F.W expansion tank should normally kept in the () level of glass tube.
If separating effect is not good, which measure should be taken ()
Which of the following items don’t belong to dock repair works?()
The cetane rating of diesel fuel is an indication of the ()
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is()
()connectors hold best if a wire is accidentally pulled or a connection becomes loose.
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a()