A.Transducer
B.Reducer
C.Transformer
D.Rectifier
您可能感興趣的試卷
你可能感興趣的試題
A.magnetic shield
B.electromagnet
C.piezoelectric device
D.electromagnetic domain
A.Sealed motors
B.Drip proof motors
C.Enclosed motors
D.Watertight motors
A.both meters in series with the resistance
B.both meters in parallel with the resistance
C.the ammeter in series and the voltmeter in parallel with the resistance
D.the ammeter in parallel and the voltmeter in series with the resistance
A.open circuit
B.short circuit
C.polarized ground
D.ground reference point
A.Contactors control current and relays control voltage
B.A relay is series connected and a contactor is parallel connected
C.Contactors can handle heavier loads than relays
D.Contactors are made from silver and relays are made from copper
最新試題
Cold weather starting of a diesel engine may be made easier by（）
If separating effect is not good, which measure should be taken （）
Using a file without a handle may result in （）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
（）are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
For a given exhaust gas boiler, what is the quantity of its evaporation mainly determined?（）
The Port State Control officer may witness a fire drill carried out by the crew assigned to these duties on the（）
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is（）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）