A.the relief valve should open before the high pressure cutout
B.the relief valve should open and allow the excess refrigerant to flow to the receiver
C.the high pressure cutout switch should operate before the relief valve opens
D.you should close in on the suction valve
您可能感興趣的試卷
你可能感興趣的試題
A.cause of salt contamination
B.location of salt water contamination
C.chemical makeup of feed-water
D.level of alkalinity in condensate
A.restriction in refrigerant piping
B.air and non-condensable gases in the condenser
C.water in the refrigerant
D.flooding back of liquid refrigerant from the evaporator
A.A shortage of liquid refrigerant
B.Excessive frost on the evaporator
C.Excessive condenser cooling water
D.Insufficient condenser cooling water flow
A.eliminate hot air from the condenser
B.maintain steady pressure in a system
C.heat, or cool one fluid by means of another fluid
D.reduce the engine room temperature in tropical climates
A.Cross
B.Parallel
C.Counter
D.Circular
最新試題
The rate of heat transfer from a hot region to a cold region is affected most by the （）.
If the head pressure of a reciprocating refrigeration compressor is excessive, （）.
The output volume of a positive fixed displacement pump can be changed only by （）.
The rate of heat transfer between the hot and cold fluids passing through a shell-and-tube type heat exchanger will （）.
Heavy wear in a particular area of the inner circumference of a packing ring may be caused by （）.
Pitting in the suction areas of a centrifugal pump bronze impeller is usually caused by （）.
When a refrigeration compressor has developed a high head pressure as a result of a refrigerant overcharge, you should （）.
The major source of chemical contaminants in hydraulic fluid is （）.
An excessive charge of refrigerant in an air-cooled refrigeration system can cause （）.
If the relief valve on the discharge side of a hydraulic pump lifts, the cause could be （）.