A.acid
B.fuel oil
C.sediment
D.water
您可能感興趣的試卷
你可能感興趣的試題
A.Main circulator pump jacket water cooling
B.Salt water service pump
C.Auxiliary condensate pump
D.Bilge pump
A.cause a loss of the liquid seal
B.create a vapor lock in the liquid receiver
C.collect in the condenser
D.cause foaming of the oil in the crankcase
A.only by the pump as its primary function
B.by resistance to the fluid flow through the system
C.by the thermal input to the systems fluid
D.solely by the charge applied by the accumulators
A.increase the flow of the cooling water through the condenser
B.adjust the high pressure cutout to maintain the desired pressure
C.open the hot gas bypass temporarily to reduce capacity
D.purge non-condensable gases to reduce the excess pressure
A.Special tools are required for lapping or grinding
B.It is impossible to throttle flow with a butterfly valve
C.To close the valve, it is only necessary to turn the handle a quarter of a turn
D.The butterfly valve should never be used in a freshwater system
最新試題
A salinity indicator is used to determine the （）.
The amount of fluid friction or internal friction inherent in a mineral lubricating oil is reflected as a measure of its （）.
If the relief valve on the discharge side of a hydraulic pump lifts, the cause could be （）.
The rate of heat transfer between the hot and cold fluids passing through a shell-and-tube type heat exchanger will （）.
One cause of high head pressure occurring in a refrigeration system can be （）.
An increasing head pressure in a refrigeration system, without any corresponding change in the cooling water inlet temperature, would probably be caused by （）.
On tank vessels equipped with power operated cargo tank valves, the type of power operator most commonly used is （）.
A salinity indicator is used to determine the （）.
If the head pressure of a reciprocating refrigeration compressor is excessive, （）.
An internal bypass is provided on some hydraulic system suction strainers to help reduce the possibility of （）.