A. AES
B. PSK
C. SSID
D. TKIP
E. WEP
您可能感興趣的試卷
你可能感興趣的試題
A. application
B. presentation
C. session
D. transport
E. internet
F. data link
A. Layer 2
B. Layer 3
C. Layer 4
D. Layer 5
E. Layer 6
F. Layer 7
A. Authentication needs to be changed to PAP for both routers.
B. Serial IP addresses of routers are not on the same subnet.
C. Username/password is incorrectly configured.
D. Router names are incorrectly configured.
A. The denied MAC addresses have already been learned or confgured on another secure interface in the same VLAN.
B. The denied MAC address are statically configured on the port.
C. The minimum MAC threshold has been reached.
D. The absolute aging times for the denied MAC addresses have expired.
A. to map all the devices on a network.
B. to display the current TCP/IP configuration values.
C. to see how a device MAC address is mapped to its IP address.
D. to see the path a packet will take when traveling to a specified destination.
E. to display the MTU values for each router in a specified network path from source to a destination.
最新試題
What is the result of issuing the frame-relay map ip 192.168.1.2 202 broadcast command?（）
Three switches are connected to one anther via trunk ports.Assuming the default switch configuration,which switch is elected as the root bridge for the spanning-tree instance of vlan 1?（）
Which Cisco IOS diagnostics command can disrupt the operation of a router under high-load conditions?（）
While troubleshooting a network problem,a technician discovers that the current copy of the Cisco IOS is outdated and needs to be updated.Which of the following commands would the technician issue to replace the Cisco router IOS with the newer version?（）
What is the subnetwork address for a host with the IP address 201.100.5.68/28?（）
How are VTP advertisements delivered to switches across the network?（）
The network administrator cannot to switch 1 over a telnet session,although the hosts attached to switch 1 can ping the interface Fa0/0 of the router.Given the information in the graphic and assuming that the router and switch2 are configured properly,which of the following commands should be issued on switch 1 to correct this problem?（）
If all OSPF routers in a single area are configured with the same priority value,what value dose a router use for the ODPF router ID in the absence of a loopback interface?（）
Which statement describes the rule of split horizon?（）
Which command encrypts all plaintext passwords?（）