單項選擇題Acknowldgement, Sequencing, and Flow control are characteristics of which OSI layer?()

A. Layer 2
B. Layer 3
C. Layer 4
D. Layer 5
E. Layer 6
F. Layer 7


您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題The administrator is unable to establish connectivity between two Cisco routers. Upon reviewing the command output of both routers, what is the most likely caust of the problem?()

A. Authentication needs to be changed to PAP for both routers.
B. Serial IP addresses of routers are not on the same subnet.
C. Username/password is incorrectly configured.
D. Router names are incorrectly configured.

2.單項選擇題What is valid reason for a switch to deny port access to new devices when port security is enabled?()

A. The denied MAC addresses have already been learned or confgured on another secure interface in the same VLAN.
B. The denied MAC address are statically configured on the port.
C. The minimum MAC threshold has been reached.
D. The absolute aging times for the denied MAC addresses have expired.

3.單項選擇題What is the purpose using the traceroute command?()

A. to map all the devices on a network.
B. to display the current TCP/IP configuration values.
C. to see how a device MAC address is mapped to its IP address.
D. to see the path a packet will take when traveling to a specified destination.
E. to display the MTU values for each router in a specified network path from source to a destination.

4.單項選擇題Which type of attack is characterized by flood of packet that requesing a TCP connection to a server?()

A. denial of service
B. brute force
C. reconnaissance
D. Trojan horse

5.單項選擇題What is the default routing update period for RIPv2?()

A. 15 seconds
B. 30 seconds
C. 180 seconds
D. 240 seconds

最新試題

A network administrator is trying to add a new router into an established OSPF network.The networks attached to the new router do not appear in the routing tables of the other OSPF routers.Given the information in the partial configuration shown below,what configuration error is causing this problem?()Router(config)#router ospf 1Router(config-router)#network 10.0.0.0 255.0.0.0 area 0

題型:單項選擇題

What is the purpose of the cisco Vlan Trunking protocol?()

題型:單項選擇題

An administrator must assign static IP addresses to the servers in a network.For network 192.168.20.24/29, the router is assigned the first usable host address while the sales server is given the last usable host address. Which of the following should be entered into the IP propertied box for the sales server?()

題型:單項選擇題

How are VTP advertisements delivered to switches across the network?()

題型:單項選擇題

While troubleshooting a network problem,a technician discovers that the current copy of the Cisco IOS is outdated and needs to be updated.Which of the following commands would the technician issue to replace the Cisco router IOS with the newer version?()

題型:單項選擇題

A network administrator needs to configure a serial link between the main office and a remote location.The router at the remote office is a non-cisco router. How should the network administrator configure the serial interface of the main office router to make the connection?()

題型:單項選擇題

You have been asked to come up with a subnet mask that will allow all three web servers to be on the same network while providing the max number of subnets.Which network address and subnet mask meet this requirement?()

題型:單項選擇題

Which command is used to display the collection of OSPF link states?()

題型:單項選擇題

Which encapsulation type is a Frame Relay encapsulation type that is supported by Cisco routers?()

題型:單項選擇題

Which command displays the CHAP authentication process as it occurs between two routers?()

題型:單項選擇題