單項選擇題

A Cisco switch has this configuration for a port channel connecting to an ESXi using dual NICs and is intended for use with an N1Kv. 
Interface fastethernet 1/10 
Switchport mode trunk 
Switchport trunk allowed vlan all 
Channel-group 10 mode on 
No shut 
Interface fastethernet 1/11  
Switchport mode trunk 
Switchport trunk allowed vlan all 
Channel-group 10 mode on 
No shut 
Interface port-channel 10  
Switchport mode trunk 
Switchport allowed vlan all
No shut 
Which Port Channel configuration must be used on the Nexus 1000v port-profile?()

A. MAC pinning
B. Cisco Discovery Protocol pinning
C. Mode On
D. Mode Active
E. No port channel configuration


您可能感興趣的試卷

你可能感興趣的試題

1.多項選擇題What are the four vPath packet flow steps? ()

A. perform flow lookups
B. intercept packets on service enabled ports
C. run packets through the vPath flow manager
D. classify the packets
E. flow manager emits an action for the packets
F. enforce the action determined by the flow manager

3.單項選擇題When using VSD, traffic flow goes from the virtual machine to which of these?()

A. Upstream switch
B. Virtual Supervisor Module
C. VMware distributed switch
D. VMware vSwitch
E. Service virtual machine

4.單項選擇題he Cisco Nexus 1000V Series Switches are virtual machine access switches that are an intelligent software switch implementation for VMware vSphere environments running the Cisco NX-OS Software operating system. Together with the VMware ESX hypervisor, the Nexus 1000V supports Cisco VN-Link server virtualization technology, which provides mobile virtual machine security and network policy for VMware View components, including the DHCP snooping feature. DHCP snooping is disabled on the Nexus 1000V by default. When the DHCP snooping feature is enabled on the Nexus 1000V, what are the default trust settings for the vEthernet and uplink ports?() 

A. All vEthernet ports are trusted, and all Ethernet ports such as uplinks and port channels are trusted.
B. All vEthernet ports are not trusted, and all Ethernet ports such as uplinks and port channels are not trusted.
C. All vEthernet ports are trusted and all Ethernet ports such as uplinks and port channels are not trusted.
D. All vEthernet ports are not trusted and all Ethernet ports such as uplinks and port channels are trusted.

5.多項選擇題

n1kv-l3(config)# show lacp offload status  
Current Status : Enabled  
Running Config Status : Enabled  
Saved Config Status : Disabled 
What two facts does the output signify? ()

A. LACP is enabled on the Nexus 1000v.
B. LACP will be offloaded to the upstream switch.
C. LACP will be negotiated to the VM.
D. LACP is negotiated by the VSM.
E. LACP is negotiated by the VEM in all instances.

最新試題

Which statement is true regarding Backup tasks in Cisco UCS?()

題型:單項選擇題

Given a Cisco Unified Computing System, which is a valid port type in end-host mode?()

題型:單項選擇題

On a Cisco Unified Computing System (UCS), which two statements regarding Ethanalyzer are true?()

題型:多項選擇題

Which of the following are supported in Cisco Global Site Selector? ()

題型:多項選擇題

Which statements are true regarding the Cisco UCS fabric failover feature? ()

題型:多項選擇題

What would be the cause for the following fault in UCS Manager?() "ether VIF x / xxx down, reason: ENM source pinning failed"

題型:單項選擇題

When testing ICMP access to a functional load-balancing ACE VIP, it fails. What is the reason of this problem? ()

題型:多項選擇題

Refer to the exhibit.Your company requires a Cisco UCS configuration that will, at a minimum, allow the configuration in the provided exhibit.  Which Cisco UCS components will meet the requirement?()

題型:多項選擇題

What is the appliance port used to connect to in a Cisco Unified Computing System?()

題型:單項選擇題

Refer to the exhibit. According to the equipment tab in Cisco UCS Manager, which is true?()    

題型:單項選擇題