Refer to the exhibit. In this network， R1 is configured not to perform autosummarization within EIGRP. What routes will R3 learn from R2 through EIGRP？（）
A.172.30.1.0/24 and 10.1.2.0/24； EIGRP only performs autosummarization at the edge between two major networks.
B.172.30.0.0/16 and 10.1.2.0/24； R2 will perform autosummarization， although R1 will not.
C.Since R2 is configured without autosummarization， it will not propagate the 172.30.1.0/24 route.
D.172.30.0.0/8 and 10.0.0.0/8.
您可能感興趣的試卷
你可能感興趣的試題
A.loop guard
B.storm control
C.storm suppression
D.broadcast suppression
E.BPDU guard
A.The IOS default is for a last-hop router to trigger a switch to the shortest path tree as soon as a new source is detected on the shared tree.
B.The IOS default is for every one of the routers on the shared tree to trigger a switch to the shortest path tree as soon as a new source is detected on the shared tree.
C.The default behavior of switching to the shortest path tree as soon as a new source is detected on the shared tree can be disabled by setting the value in the ip pim spt-threshold command to "infinity."
D.The default behavior of switching to the shortest path tree as soon as a new source is detected on the shared tree can be disabled by setting the value in the ip pim spt-threshold command to "zero."
Refer to the exhibit. In this network， R1 has been configured to advertise a summary route， 192.168.0.0/22， to R2. R2 has been configured to advertise a summary route， 192.168.0.0/21， to R1. Both routers have been configured to remove the discard route （the route to null created when a summary route is configured） by setting the administrative distance of the discard route to 255.What will happen if R1 receives a packet destined to 192.168.3.1？（）
A.The packet will loop between R1 and R2.
B.It is not possible to set the administrative distance on a summary to 255.
C.The packet will be forwarded to R2， where it will be routed to null0.
D.The packet will be dropped by R1， since there is no route to 192.168.3.1.
最新試題
Which of the following describes the roles of devices in a WAN?（）
The Frame Relay network in the diagram is not functioning properly.What is the cause of the problem?（）
What is the next state of initial in spanning-tree protocol？
What is the three main step of using the QoS feature with MQC command line interface？
As a CCNA candidate,you must have a firm understanding of the IPv6 address structure.Refer to IPv6 address,could you tell me how many bits are included in each filed?（）
How should arouter that is being used in a Frame Relay network be configured to avoid split horizon issues from preventing routing updates?（）
Local Preference？
aaa架構(gòu)中哪個(gè)是要求用戶輸入用戶名和密碼？
Refer to the exhibit.The network administrator is in acampus building distant from Building B.WANRouter is hosting a newly installed WAN link on interface S0/0.The new link is not functioning and the administrator needs to determine if the correct cable has been attached to the S0/0 interface.How can the administrator accurately verify the correct cable type on S0/0 in the most efficient manner?（）
The following configuration line was added to router R1 Access-list 101 permit ip 10.25.30.00.0.0.255 any What is the effect of this access list configuration?（）