A.high-pressure steam-driven air-ejector
B.motor-driven vacuum pump
C.water-motivated air eductor
D.centrifuge pump
您可能感興趣的試卷
你可能感興趣的試題
A.condenser
B.flashing device
C.lashing device
D.vacuum pump
A.lower condensing
B.higher cooling
C.lower cooling
D.higher condensing
A.the oil feeding is stopped and replaced by admitting flushing water
B.the flushing water feeding is stopped and replaced by admitting oil
C.the feeding of dirty oil and flushing water is stopped
D.the feeding of dirty oil and flushing water is admitted
A.by opening the separator manually
B.by separating the lower part from the upper part automatically
C.by separating the upper part from the lower part automatically
D.continuously
A.a centrifuge
B.an electric motor
C.a bowl assembly
D.a driving motor
最新試題
Diesel engine air start system check valves are opened by （）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated（）
Flame failure in an automatically fired auxiliary boiler can from a/an （）
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a（）
（） is not installed on the main switchboar.
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?（）
If separating effect is not good, which measure should be taken （）
The ISPS Code consists of a mandatory section-Part A, which shows（）
If two A.C.generators are to be operated in parallel, the load is distributed evenly by（）